Automobile power battery shell forming oil

Performance advantages:

       1. Super long lubrication performance: The oil products are made of three types of hydrorefined base oil and special additives. Its lubricity and oil film strength are more than twice that of other similar products, which can greatly extend the service life of the mold and reduce the frequency of mold repair.
         2. Not easy to produce black spots: The high purity and perfect formula combination of the hydrogenated base oil used can effectively prevent the formation of oxidation dirt and facilitate subsequent cleaning.
        3. Good cleanability: Even under the same cleaning conditions, the oil products are very easy to be removed, and the return rate is often lower, reducing the cleaning cost.
         4. Very good anti-rust performance: not only has good anti-oxidation properties for aluminum shells, but also has a good anti-rust effect on machine tools and oil circuit systems, which plays a good maintenance role for machine tools.
         5. Strong versatility: Not only small aluminum battery shells for mobile phones but also large shells for new energy power batteries, our products can be applied

Main uses:
         Battery shell forming oil is suitable for various aluminum battery shell stamping and stretching purposes. The corresponding model is selected according to the different stretching heights;
           It can also be used for stamping and stretching of copper materials, cold-rolled plates, etc.

Typical data:

Battery case molding oil	1	2	3
Appearance	yellow transparent	yellow transparent	yellow transparent
Density (20℃) (g/ml)	0.837	0.846	0.864
Kinematic viscosity@40℃	156	175	252
Kinematic viscosity@100℃	16.2	18.3	23.4
Viscosity index	110	116	115
Flash point ℃	214	205	218
Moisture	none	none	none
Copper sheet corrosion (100℃, 3h)	1b	1b	1b
Acid value (calculated as KOH) (mg/g)	0.21	0.19	8.36